Every car needs a water pump to transfer fluids from the radiator to the engine, making it an essential part of every car. In other words, it keeps the engine’s temperature at the proper level. Therefore, the issues brought on by a broken water pump are imminent and risk damaging your car’s engine. Car owners must to be aware of the warning signals and risks associated with using a damaged water pump.
SIGNS OF A BAD WATER PUMP
The engine of the automobile will suddenly begin to overheat if the coiling system is not functioning properly. Here are several indicators of a malfunctioning water pump.
The radiator does not operate as it should when the automobile engine becomes too hot. The water pump prevents the engine from cooling, which leads to overheating.
STEAM OR SMOKE COMING OUT OF THE RADIATOR
Stop the car if you notice any smoke or steam coming from the radiator. This occurs when a broken engine close to the pump’s fan malfunctions. When this happens, call the professionals. Restarting the automobile will have negative effects, therefore refrain from doing so.
A noisy water pump is possible. When the water pump’s internal bearings malfunction or there is a loose bearing, noise is produced.
OTHER SIGNS TO LOOK FOR
• Liquid overflow
• Pump rust
• Abnormal temperature gauge
• Holes on the dry side of the water pump
• Reduced heat or lack of heat
WHAT CAUSES THE WATER PUMP TO FAIL?
A water pump might malfunction for a number of reasons. Even so, this component ages and deteriorates. The following factors will speed up the procedure.
Unsuitably Installed Belt
Water pumps that are overly tight or out of alignment might fail because the component can seize.
Rust inside the water pump will cause it to malfunction due to contaminated or poor coolant.
When a water pump’s coolant level drops, it lacks the lubrication needed to maintain the seals’ functionality. These seals can malfunction from overheating and lead to more coolant leaks.
- Blown gaskets
- Flushing the coolant on time
- Wear and tear
- Improper installed belt
- Things to Note When Replacing a Water Pump
The model, manufacture, and labor involved will all affect how much it will ultimately cost to replace the water pump. A new water pump typically costs between $50 and $100. The cost is increased by the labor, which depends on how difficult it is to access the pump and ranges from roughly $200 to $400.
The lifespan of a water pump should be between 60,000 and 90,000 miles, similar to that of a timing belt. It makes logical to replace the water pump when you have a timing belt while the timing cover is removed. The water pumps should be changed before they break down.
Driving a vehicle with a faulty water pump is not recommended. Leakage, smoke, and overheating are indications of a malfunctioning water pump and should be fixed right away. An entirely broken water pump may result in engine failure.
All of these issues may be resolved by replacing a water pump. Hire a trained professional to assist you so that they can repair the damaged part and inspect the complete engine system as well.